Entries

Installing a Getrag 240 into an Opel requires using an automatic driveshaft as the yoke differs from the 4-speed driveshaft yoke. These driveshafts are getting rare. Now, while there are GM Yokes with the same diameter and number of splines as the Getrag's output shaft their use is not recommended as there is one major difference! The GM splines are straight cut while the Getrag are beveled. Using the GM yoke could cause the binding of the yoke on the output shaft.

A scan of the 1967 Dealer Binder with all of the info, specs, colors, interior samples, and prices for the Kadett B of 1967

JJ Wheatley built one of the first Aero GT conversions in the US, starting it back in 1979. I recently came across a folder that had pictures and details of this build including a letter from Erhard Schnell discussing the Aero GT.

Scanned pages and blow up of the 2.2L LE Jetronic manual from the Haynes Opel Rekord Service Manual. Includes wiring diagrams for 2.2L Electronic ignition as well

Fourteen page 1974 Preliminary Service manual for Manta and Opel 1900/Ascona

Opel Parts Illustration Manual - Part 8 - Group 8 ( Fuel and Carburetors and Exhaust ) November 1972 (English Version) 300 DPI Scan with OCR'd for searchability

Opel Parts Illustration Manual - Part 7 - Group 7 ( Tranmissions ) November 1972 (English Version) 300 DPI Scan with OCR'd for searchability

Opel Parts Illustration Manual - Part 6 - Group 6 ( Engine & Clutch ) November 1972 (English Version) 300 DPI Scan with OCR'd for searchability

Opel Parts Illustration Manual - Part 11 - Group 12 ( Electrical Equipment ) - Dash Clusters November 1972 (English Version) 300 DPI Scan with OCR'd for searchability

Opel Parts Illustration Manual - Part 10 - Groups 11 ( Sheetmetal ) November 1972 (English Version) 300 DPI Scan with OCR'd for searchability